Tipa

Do you have a problem with frequent fluctuations in pH? Your pool water can be plentiful -> ensure Aquamar Alkalita plus more lively and sparkling water in the pool. Alkalite is also called the "Carbonate balance". This means that if pool water has a permissible level of alkalinity and is therefore in carbonate equilibrium, water is able to naturally equalize pH. Because of the use of, for example, water heaters and disinfectants, water alkalinity can be reduced and consequently pH variations. If the total alkalinity is too low, the pH is not stable and has very frequent fluctuations. Conversely, at a high alkalinity level, the pH will tend to return to the original higher pH. Aquamar Alkalita plus is a powder preparation to increase the alkalinity of the pool water and stabilize the pH. When total alkalinity is maintained within the range of 80 - 120 ppm, it prevents sudden changes in pH and optimizes the effect of other pool water treatment products. The alkalinity value should always be adjusted before you measure and adjust the pH and free chlorine value.

Instructions for use:

- Before using the product, measure the total alkalinity value using a band tester
- If less than 80 ppm, add Aquamar Alkalita Plus and, if higher than 120 ppm, add Aquamar pH minus
 
Dosage:

- For an increase in alkalinity of 10 ppm, add 18 g of product per 1m3
- Calculate the quantity required by the volume of your pool
- Dissolve the measured amount of powder in a few liters of water and pour the solution into the pool in the area of ​​the water inlet (possibly the dirt collector) while the filter device
- Do not increase alkalinity by more than 50 ppm in one step
- If more alkalinity is required, make a further dose after sufficient water is mixed