Tipa

Wireless water detection sensor for iGET SECURITY M5 alarm. It is used to detect water in bathrooms, technical rooms, tanks, etc., wherever there is a risk of flooding. As soon as the detection plate detects water, the transmitter informs the alarm. Tamper protection, maximum 256bit transmission security, very long battery life of 5 years, alarm constantly monitors the activity of this sensor, as well as the signal, battery percentage and more.

Easy pairing to the basic alarm set using a QR code. Location distance from the main unit up to 1 km. Processing in a modern design, environmentally friendly due to low energy consumption.

- the sensor is designed for all places where it is necessary to report the presence of water using the detection plate,
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- the highest encryption of 256-bit wireless transmission,
- battery life up to 5 years depending on the number of detections,
- distance of the sensor from the main unit up to 1 km,
- the iGET M5 alarm still checks if this sensor is available, also the signal strength and the% of the battery in the sensor,
- contains a signaling LED diode - lights up when water is detected, stays on when the battery is low, also serves as a test button.

Properties:

- Transmission frequency: 868.35 MHz
- Security: 256 bit
- Battery life: up to 5 years
- Operating temperature: - 20 ° C ~ + 50 ° C
- Operating humidity: 5% ~ 95%
- Power supply: 1x 3V battery, type CR123A
- Operating current: up to 100 mA
- Quiescent current: 0.015 mA
- Contact closing: as soon as the detection plate is partially under water
- Signal range to the central unit: up to 1 km in direct line of sight
- Sensor weight: 39g including battery
- Transmitter dimensions (length x width x depth): 84 x 26 x 22.5 mm
- Sensor dimensions (length x width x depth): 30.4 x 26.4 x 10 mm
- Cable length from transmitter to detection plate: 220 mm