Tipa

Emergency power supply for 40W Led panel with emergency output 18W for 2 hours. The module installed in the luminaire enables the connected LED light to be lit to the standard 230V network, in the event of a power failure, the electronics switch to a backup battery source and the light source is still lit at 18W max. 2 hours (50% luminous intensity), at lower power consumption, the lighting time is prolonged proportionally. The warranty period is 24 months, the warranty does not apply to battery wear caused by its usual use. (It is not possible, for example, to claim the battery after several months of use because it is less than its original capacity). For a good battery life and battery life, it is ideal to discharge and recharge the battery once every 3 months, thus extending battery life for several years.

This product must be installed by an electrician. Do not connect wires when the power is on. Before switching on the device, make sure there is no short circuit.
This module may not work for some types of LED drivers, especially dimmable.

Product parameters:

The module is equipped with LEDs and button:

- Type of luminaire: LED panel 40W
- Input voltage: AC100-280V / 50-60Hz
- Output voltage: DC 18-60V
- Battery type: Li-ion 12V 4400mAh
- Dimensions: 260 * 60 * 60mm
- Weight: 1.23kg

specifications:

- Emergency power supply: 18W (50% luminous intensity)
- charging time: (from zero) 24 hours
- lighting time: 120 minutes
- conversion efficiency: 80%
- force factor: 90%
- Emergency switching time: 1 second
- Lighting system: continuous
- lifetime: 20,000 hours
- Operating temperature: -10 ° to 50 ° C
- relative humidity range: 65% to 20%


The module is equipped with LEDs and button:

- green light: operating state on the emergency module
- red light: charging
- Yellow light: failure
- test: test button