Tipa

The Kärcher SP 7 Dirt Inox dirty water pump is instantly triggered by an individually adjustable Level Sensor upon contact with water. If the water level falls below the level sensor level, the pump will automatically shut off after 15 seconds. The very powerful submersible pump is suitable for pumping large garden lakes, flooded cellars or flooded building pits (up to 100 m³), ​​as it can reliably pump up to 15,500 l of heavily polluted water per hour (with particles of up to 30 mm particles) . In case of even more dirty water, a built-in and down-adjustable pre-filter made of stainless steel is used to protect against clogging. If there is a risk of clogging with large dirt, a built-in stainless steel pre-filter can be used to protect the pump circulator. The submersible pump can also be reset to permanent operation by pressing the automatic / manual switch. With the appropriate Level Sensor setting, the pump can reliably drain up to 35 mm of residual water - both in permanent and automatic mode. With a Quick-Connect connection, a 1 ", 1 1/4" - and 1 1/2 "hose can be connected quickly and easily to the pump. The pump has a very long service life thanks to its stainless steel housing and robust, high-quality seal. possible extension of the warranty period to 5 years.

Properties:

- Automatic / manual mode switch
- To switch between automatic and manual modes
- Designed for dirty water
- Reliable drainage of water with particles of dirt up to 30 mm
- Comfortable handle
- Can be grasped comfortably and can also be used as a rope attachment holder
- Robust and built-in pre-filter made of stainless steel
- Protects the pump against excessive dirt and prevents clogging of the pump circle

Specifications:

- Engine power max. (W): 750
- Max flow (l / h): 15500
- Transport height (m): 8
- Max. pressure (bar): 0.8
- Depth depth max. (M): 7
- Grain size max. (Mm): 30
- Residual water height (mm): 35
- Inlet temperature max. (° C): 35
- Weight without accessories (kg): 6.7
- Dimensions (L x W x H) (mm): 238 x 287 x 354
- Connecting cable (/ m): H07RN8-F / 10

Equipment:

- Comfortable handle
- Quick Connect for quick and easy hose connection
- Switching manual / automatic operation, Switch on pump
- Level Sensor: Continuous definition of switching height
- Integrated pre-filter made of stainless steel
- In automatic mode (auto), the pump switches automatically to the water level
- In manual operation, the pump runs permanently to achieve the minimum residual water height

Fields of application:

- To drain water from garden ponds
- For use in floods
- Draining up to 100 m³ of water from the building pit