Tipa

The simplest boiler water heating system available on the market.

The set consists of 8 monocrystalline panels JKM410M-54HL4-V black frame Jinko with a power of 410W each, an ECO Solar Boost MPPT-3000 3kW converter and a complete 25 meter long cabling with attached MC4 connectors for the converter.

The system is simple, it only requires the connection of 4 typical photovoltaic panels with an operating voltage of approx. 32V or the corresponding number of others and an energy receiver, e.g. electric boiler, underfloor heating.

Converter ECO Solar Boost MPPT-3000
The maximum power of the system is 3kW, the converter has priority output number "1" and dependent output number "2".

This allows you to connect two heating devices, for example two boilers, one of which will heat first and the second when the thermostat of the first one stops receiving energy from the inverter. Thanks to the implemented MPPT function, the inverter automatically adapts to the performance of the heater and sets its operating point so that the energy received from the photovoltaic panel system is maximum.

These are oversized items that are not eligible for free shipping. The delivery time from the creation of the order can be extended by 3-4 working days.

Technical parameters:

- input voltage [VDC]: 120 to 350 (VDC)
- output voltage [VAC]: 120 to 350 (VAC)
- maximum power: 3 kW
- MPPT function: YES
- connection of PV panels: series or series-parallel
- voltage curve at the output: modified sine
- VAC output #1: priority
- VAC output no. 2: dependent
- under/over voltage protection: YES
- thermal protection: YES
- overload protection: YES
- working temperature: -25 °C ~ + 55 °C
- efficiency: > 94%
- cooling: Active
- power connector: MC4
- output socket 230V: 2 x E (Fernch with pin)
- material: Aluminum
- degree of protection (IP): IP21
- dimensions LxWxH [mm]: 290 x 190 x 80 mm
- weight (kg): 2.4 kg

Jinko Solar JKM410M-54HL4-V Photovoltaic Panel Black Frame

Technical parameters:

- nominal power: 410 W
- type: monocrystalline
- module efficiency: 21.00 %
- maximum current (Imp): 13.39 A
- maximum supply voltage (Vmp): 30.62V
- open circuit voltage (Voc): 37.14V
- short circuit current (ISC): 13.92A
- maximum system voltage: 1000/1500VDC (IEC)
- output tolerance: 0~+3%
- connector type: MC4 / MC4 compatible
- front glass: anti-reflective layer, high permeability, low iron content, 3.2 mm tempered glass
- degree of protection: IP68
- module dimensions: 1722×1134×30 mm
- cell type: type P Mono-crystalline
- number of cells: 108 (2x54)
- weight: 22.0 kg
- frame: anodized aluminum alloy
- frame color: black
- junction box: IP68
- output cables: TUV 1×4.0 mm2 (+): 400 mm, (-): 200 mm or customized length



WARNING! Heating devices with electronic regulators can only be powered from the 1st output.

The set includes:
8 monocrystalline PV panels 410W JKM410M-54HL4-V black frame Jinko
Solar converter ECO Solar Boost MPPT -3000 3kW
Cable set 25 meters
MC4 connectors
installation instructions

The table you can find in the photos shows how to choose the optimal heater depending on the power and voltage of the PV system. Choosing the optimal heater guarantees the highest efficiency of the PV system for heating water.
As you can see, the actual performance of 230V heaters is strongly dependent on the PV system voltage, optimal heaters are marked in green, too weak in orange and too strong in red.