Tipa

Solar regulator The SOL MPPT 10A regulator is intended for charging batteries from a connected set of solar panels. This modern and multifunctional device charges based on the latest and most efficient MPPT charging technology.

Thanks to the optimization of the charging process, the controller effectively extends the life of the battery compared to standard PWM controllers.

- Modern MPPT (Max Power Point Tracking) technology.
- Conversion/tracking efficiency > 99.9%
- Automatic recognition of the voltage of the connected 12V battery
- For use with GEL, AGM, lithium and liquid electrolyte batteries
- Setting all LiFePO4 battery parameters is only available from the smartphone app
- Four-phase charging: MPPT, BOOST (pulse), Equalization (equalization), Float (maintenance)
- The controller is controlled using a special application for smartphones
- Fully automatic protections (short circuit, temperature, overload)

Technical parameters:

- Maximum charging current: 10A
- Battery voltage: 12V
- Maximum panel voltage: 50V
- Own consumption: 8 mA
- For batteries: AGM, GEL, lithium, liquid electrolyte
- MPPT charging voltage: 14.5 (at 25 °C)
- BOOST voltage: 14/14.8 V (at 25 °C)
- Voltage equalization: 14/15 V (at 25 °C)
- Floating voltage: 13/14.5 (at 25 °C)
- Receiver disconnection at low voltage: 10.8~11.8V/21.6~23.6V SOC1~5
- Reconnect voltage: 11.4~12.8V/23.2~25.6V
- Overcharge protection: 15.5V
- Temperature compression: -4.17 mV/K per cell (Boost, Equalization) -3.33 mV/K per cell (Float)
- Dusk/dawn sensing voltage: 5/10V
- Dimensions: 85.8 x 81 x 23.1 mm
- Weight: 0.26 kg
- Safety: IP67