Tipa

Robust and fast MPPT controller with VE.Can for demanding conditions with panel voltage up to 450 V, charging current 100 A. For 48V batteries, PV max. 5760Wp. Built-in Bluetooth and display. Solar controllers SmartSolar MPPT RS 450V/200A are a solution for systems with a larger number of PV panels connected in series charging 48V batteries. This product is ideal for large island systems, but also for systems connected to the distribution network. (Cannot be used with BMZ batteries due to low absorption voltage 60V).


Product parameters:

Two independent PV inputs for MPPT monitoring:
- thanks to two independent inputs, you can connect, for example, two differently oriented or differently sized PV arrays.

VE.Direct port:
- for connection to the GX device, system monitoring, data transfer to the VRM portal and remote firmware updates.

VE.Can:
- solution for multiple solar controllers in one system. With the VE.Can function, up to 25 units can be synchronized in one PV system.

Ultra-fast Maximum Power Point Tracking (MPPT):
- Victron Energy's MPPT solar controllers are among the absolute world leaders in this field and offer ultra-fast MPPT tracking.

Built-in Bluetooth Smart:
- you can monitor and configure the SmartSolar MPPT controller via smartphone or tablet. You can monitor current statuses and historical data and perform parameter settings using the VictronConnect mobile app. You can download the app for iOS and Android here.
- you can also download the VictronConnect application for free on Google Play or in the App Store.
- if you want to do the above using a PC, then you have the option to use the VE.direct to USB cable to connect the controller and PC. You just install the Victron Connect program on your computer, which you can download for free here.

Built-in display:
- the display is located on the front side of the controller and allows you to visualize all operating conditions.

Isolated PV connection for greater safety:
- full galvanic isolation between PV and battery connections provides additional overall system safety.

PV insulation resistance monitoring at higher voltages:
- MPPT RS continuously monitors the PV panels and can detect any faults that reduce the insulation of the panels to dangerous levels.

I / O connections: programmable relay, temperature sensor, auxiliary, digital input and voltage sensor. The remote input can receive signals from the Victron BMS.

Recommended configuration:
- for batteries with a voltage of 48V. Maximum DC charging power of the system 5760W. If these values ​​are exceeded, the controller will not be damaged, but will only automatically reduce the incoming power from the panels to acceptable values.
- the maximum input short-circuit current to the regulator from the PV panels must not exceed 20A per input, otherwise permanent damage may occur.
- the maximum input voltage of PV panels referred to as Voc (no-load voltage) must not exceed the value of 450Voc (approx. 360Vmpp), otherwise permanent damage may occur - it must be taken into account that Voc increases with decreasing temperature. MPPT operating voltage range is 80-450V, trigger voltage is 120V.

Detailed technical information can be found in the attached technical sheet.