Tipa

The GSM socket is equipped with an input for a temperature sensor or potential-free contact. This analog input expands the use of the socket for both temperature control and alarm states. Also included with the GSM socket is an integrated microphone for wiretapping. All features can be set up using the TS11GST-SW (downloadable) software included in the package or directly from the phone, see instructions. The new feature is control over Android or iOS apps.

Product parameters:

The TS11 GST allows you to set the following functions:
- automatic sending of SMS when the temperature limits measured at the input are exceeded
- ringing for 1 phone number when temperature limits are exceeded
- automatic output switching when the temperature limits measured at the input are exceeded
- Control with hysteresis 1 ° C (relay switches to 1 ° C below the setpoint if the current is equal to the desired one and switches off). Controls the output according to the required input temperature
- automatic sending of SMS with status information (switching or unsetting) of the input contact
- ringing for 2 phone numbers when the input contact status is changed
- automatic switching of the output contact when the input state is changed
- time control of the output. The output is activated by a command SMS with the specified switching time directly in the SMS message (from 1 minute to 999 minutes = 16 hours 33 minutes)
- Output control by ringing for t (1s to 23h 59min 59s)
- Turn on the intercom by ringing
- restart, short-time power-off of the socket output for 20s (for servers)
- Indication LED for status of GSM socket.

Where to use TS11 GST in practice?

1) Connecting to an existing alarm
2) door opening supervision, level monitoring
3) Connection to the fire detector
4) Minimum and maximum temperature monitoring (eg in an object, greenhouse ...)
5) for control of gates, barrier
6) heating switching, air conditioning, lighting, swimming pool filtration, pumps, irrigation ...

Requirements for using PC software:

1. The program requires a library installation. NET Framework version 3.5 (select by system) and higher (included in the CD)
2. It is tested on Windows XP, Win7, Win 8
3. For TS11 GST you need to have drivers available at http://www.ftdichip.com/Drivers/VCP.htm (included in the CD)

Technical parameters:

- power supply: 230V / 50Hz
- GSM module: SIM 900
- GSM antenna: direct 1 dB
- Data cable: USB
- setup via PC: (software included)
- input: 1x (two-state / temperature)
- output: 1x16 A / 250 VAC
- Dimensions (L x W x D): 130 x 57 x 85mm
- Working temperature: 0 ° C to 50 ° C