Description
Wireless smoke sensor for alarm iGET SECURITY M5. It works independently and also as an accessory for the iGET SECURITY M5 alarm. Meets the provisions incl. standards EN14604: 2005. Optical smoke detection, unobtrusive design. Tamper protection, maximum 256bit transmission security, long battery life of up to 3 years, alarm constantly monitors the activity of this sensor, as well as the signal, battery percentage and more.
The smoke sensor / detector is already an integral part of houses, cottages, apartments, garages, etc. The iGET SECURITY EP14 is autonomous or also as an accessory for an alarm. By scattering the optical beams in the sensor chamber, smoke is detected and then an acoustic and light alarm is triggered and the EP14 informs the main alarm unit. Easy pairing to the basic alarm set using a QR code. Location distance from the main unit up to 500 m. Indoor use.
- the sensor / detector is intended for the detection of smoldering fire, after the detection of smoldering fire, the optical and acoustic signaling is activated. When connected to the central alarm unit, this unit will also inform about the alarm via an application or SMS,
- the EP14 sensor works on the principle of scattered light, it is very sensitive to larger particles that are contained in the smoke,
- is intended for all rooms where fire guarding is necessary,
- whether the sensor is fully functional can be determined using the built-in test button,
- the main destination is houses, cottages, flats,
- not intended for caravans, residential buildings, and industrial environments,
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- the highest encryption of 256-bit wireless transmission,
- battery life up to 3 years,
- distance of the sensor from the main unit up to 500 m,
- The iGET M5 alarm still checks if this sensor is available, as well as the signal strength and the% of the battery in the sensor.
Properties:
- Transmission frequency: 868.35 MHz
- Security: 256 bit
- Battery life: up to 3 years
- Operating temperature: 0 ° C ~ + 50 ° C
- Operating humidity: 10% ~ 90%
- Supply voltage: 1x 9 V battery, type 6F22 / 6LR61
- Smoke sensitivity: 0.086 dB / m to 0.14 dB / m
- Certification: BS EN 14604: 2005
- Indoor siren volume: 85 dB / 30 cm
- Operating current: up to 100 mA
- Quiescent current: 0.02 mA
- Signal range to the central unit: up to 500 m in direct line of sight
- Sensor weight: 145g including battery
- Sensor dimensions (length x width x depth): diameter 107 mm, depth 33 mm
Nobody has entered comment on this product yet. Be first!