Tipa

Intelligent battery video doorbell, contains a FullHD camera with two-way sound transmission, outdoor and resistant to dust and water according to IP65, rechargeable battery 5200 mAh lasting up to one year, PIR sensor for motion detection, angle of view 170 °, night IR illumination up to 8 m, online monitoring in the iGET HOME application in Czech using a mobile phone or tablet, includes microphone and speaker, storage of recordings and photos on a microSD card (up to 128 GB) or Cloud. FullHD 1080p (1920 x 1080) resolution and 25 fps for very high quality video, day and night operation, 1/3 "CMOS sensor, standard H.264 / H.265 video compression, WiFi 802.11 b / g / n , digital WDR.

As soon as the person approaches the bell, the PIR motion sensor is activated and sends you a notification to the mobile phone with the photo. The bell is connected via WiFi to your home WiFi network. As soon as the person rings, all mobile phones and tablets that have the application installed will start ringing. It is then possible to receive and communicate this ringtone on the mobile phone using both two-way audio and video transmission. When purchasing the iGET CHS1 speaker, there will also be a standard ringing from the speaker or by means of LED signaling on this speaker.

Easy to set up and operate
The setup is done in a few simple steps according to the manual, which is completely in Czech, Slovak, Polish, Hungarian and English. The application also contains these language versions. The image from the bell can be viewed on a mobile phone and tablet. Android and iOS systems are supported for mobile devices.

High image quality and angle of view
iGET HOME DS1 contains a high-quality 1/3 "CMOS sensor with a resolution of 1920 x 1080 pixels (FullHD 1080p) and 25 frames / s, thanks to which you can look forward to a clear and sharp image. The bell has a large angle of view 170 °. Focal length f = 4 mm Shows videos using H.265 and H.264 encodings.

Battery operation or external power supply
The bell contains two rechargeable batteries with a total capacity of 5,200 mAh. The life of these batteries is more than half a year, depending on the number of motion and ring detections. Charging takes place via a microUSB port and a standard charger for a mobile phone. With the 5V / 2A charging adapter, charging takes 4 to 8 hours. In addition, it is possible to connect an external power supply directly to the AC or DC 12-24V / 1A doorbell connectors.

Night vision
Thanks to the built-in IR illumination, the bell can be used day and night. It contains illuminated IR LED diodes with a range of up to 8 m.

Security
WiFi wireless connection includes strong security 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK. The bell is also placed in the holder and secured with a screw. When manipulated, the bell sends notifications with photos.

Motion detection
When motion is detected, the bell starts saving and sending notifications to the mobile phone with photos. It detects movement at a viewing angle of 170 °.

Sound
The bell also has a built-in microphone and speaker, so it is possible to communicate directly in both directions.

Connectivity and speaker connection with sounds
The bell connects to the 802.11 b / g / n 2.4 GHz wireless WiFi network, which is supported by every WiFi router in the home and in the company. It contains connectors for external power supply, a rechargeable microUSB connector and a microSD slot for a memory card of up to 128 GB. In addition, an unlimited number of additional iGET CHS1 speakers can be connected. They provide standard ringtones (choice of 34 melodies and 4 modes of sound combination and LED signaling).

Properties:

- very high resolution 1080p (1920x1080), 25 fps
- angle of view: 170 °
- Optics type: 1/3 "CMOS
- WDR: yes, digital
- protocols: TCP / IP, HTTP, DHCP, DNS
- dust and water resistance IP65
- control via mobile phone and tablet (Android, iOS)
- night vision up to a distance of 8 m (contains 4 pcs of 5 mm 850nm LED illumination IR LED diodes)
- Built-in microphone and speaker
- motion detection setting: yes, 3 detection levels to be selected
- photo and video storage: on microSD card or Cloud
- maximum microSD card size: max. 128 GB
- connection via WiFi 802.11 b / g / n 2.4 GHz
- security: 64 / 128bit WEP, WPA / WPA2, WPA-PSK, WPA2-PSK
- application "iGET HOME" - languages: CZ, SK, EN, PL, HU
- photo: yes, storage in HD / SD, mirroring
- working temperature: - 20 ° C to + 50 °
- water resistance: yes, according to IP65 standard
- external power supply - batteries: using rechargeable internal Li-ion batteries 5200 mAh
- external power supply - external power supply: AC or DC 12-24V / 1A
- bell dimensions: 133 x 59 x 39 mm.

Package contents:

- iGET HOME Doorbell DS1 doorbell
- bracket for mounting the bell on the wall
- double-sided tape (placed on the bell cover)
- USB-microUSB charging cable
- quick operating instructions EN, CZ, SK, PL, HU
- screwdriver
- coupling for connection to external power supply
- dowels and screws for mounting