Tipa

You can also monitor temperature and humidity values remotely, they are used to create smart home automation. Using the Immax NEO smart gate (can be purchased separately), you can receive information from the sensor into the IMMAX NEO PRO application.
After connecting to the network of your smart home, you will be able to monitor the current temperature and humidity through the IMMAX NEO PRO mobile application anytime and anywhere. All you need is internet access. In the mobile application, you can also track the evolution of the temperature in the past. With information about the current temperature and humidity, you can also create automations for your smart home. Automation can be programmed in the application based on three values: temperature, humidity, battery status.
Another important condition is that the sensor is within range of the smart gate. ATTENTION - this is not a WiFi sensor, it requires an Immax NEO smart gateway (can be purchased separately), or another Tuya hub/bridge/gateway on the platform that communicates using the ZigBee 3.0 standard. The system is fully compatible with iOS, Android, Amazon Alexa, Apple Siri shortcuts, Google Assistant, TUYA, Lidl.

Technical parameters:

Protocol: ZigBee 3.0
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: ZigBee: 10dBm - max 19dBm
Wireless range: 30 m line of sight, 10 m in built-up space
Power source: 1x 3V CR2032 battery
Operating voltage: 2.4V-3.3V
Average operating current: 5 mA (Zigbee)
Standby current: < 3uA
Battery life: 6 - 8 months
Data detection: temperature and humidity detection takes place every 5 seconds
Data update: when the temperature change is greater than 0.6 degrees or the humidity change is greater than 6%; by default, data is sent to the application every 30 minutes
Operating temperature: -10°C to + 50°C
Operating humidity: maximum 95% (non-condensing)
Degree of protection: IP20
Certificates: CE
Dimensions: 35x35x8mm
Weight: 8g

Package contents: sensor, user manual