Tipa

You can also monitor the temperature and humidity values ​​remotely, used to create smart home automation. With the Immax NEO BRIDGE PRO Smart Zigbee 3.0 v2, you can receive information from the sensor to the IMMAX NEO PRO application.

After connecting to the network of your smart home, you will be able to monitor the current temperature and humidity via the IMMAX NEO PRO mobile application anytime, anywhere. All you need is internet access. In the mobile application, you can also track the development of temperature in the past. In addition, you can create automation for your smart home with information on the current temperature and humidity. Automation can be programmed in the application based on three values: temperature, humidity, battery status.
When installing (the sensor can be easily glued anywhere), pay attention to the fact that the sensor must not come into direct contact with water. Another important condition is that the sensor is within range of the smart gate. ATTENTION - this is not a WiFi sensor, it requires Immax NEO BRIDGE PRO Smart Zigbee 3.0 v2 (can be purchased separately, or another hub / bridge / gateway on the platform, which communicates using the ZigBee 3.0 standard.

Properties:

- Immax NEO application: No.
- Immax NEO PRO application: Yes
- Zigbee communication protocol: 3.0
- Frequency: 2400MHz ~ 2483.5MHz
- Wireless range: 30 m direct visibility, 10 m in a built-up area
- Power source: 1x 3V CR2032 battery
- Operating voltage: 2.5V-3.3V
- Average operating current: 5 mA (Zigbee)
- Standby current: T <3uA
- Operating temperature: -20 ° C to + 60 ° C
- Operating humidity: maximum 95% (no condensation)
- Certificates: CE
- Dimensions: 37x37x12mm

Package contents: sensor, user manual