Tipa

Outdoor sealing tape is a joint tape for covering window and door joints from the outside.

It allows the diffusion of water vapor from the inside to the outside.
Protects joints and building structures from moisture and wind.
Adhesive tapes adhere very well to all common building materials.
The material of the joint tape can be plastered and painted over.
It is expandable in width and resistant to movements in wall constructions.

Use
It is used to protect window and door joints and building structures from moisture and wind.
The recommended installation temperature is +5 °C to +30 °C.

Application procedure
Mounting surfaces must be clean, dry and free of oil, grease and dust. Chemicals containing substances that prevent or reduce adhesion must not be used. Surface roughness, unevenness or porosity may reduce adhesion. Non-adhesive surfaces are recommended to be stabilized with PENOSIL Premium BetPrimer primer with binder dispersion solution in a ratio of 1:5.

Method of use:
Unwind the installation tape from the spool and cut the required length.
Remove the protective film from the adhesive tape and stick it to the window frame.
If the window or door is installed flush with the wall plane, one extra tape width must be left in the corners.
If the window or door is installed inwards from the plane of the wall, half the width of the extra tape must be left in the corners.
The tape is glued around the perimeter of the frame, starting with the bottom bar of the window (chair).
Do the same on all sides of the window you want to seal.
Then fit the window or door frame, fasten properly and fill the window gap with construction foam.
Once the foam has set, remove the excess foam and attach the other edge of the tape to the siding or wall.
Use a pad roller for optimal grip.
Adhesive tape on each side of the window tape allows for the installation of joint tape before and after window/door installation and the use of mounting foam.
Use a pad roller for optimal grip.

Technical parameters:

- Installation temperature: +5°C to 30°C
- Temperature tolerance: -40°C to 80°C
- White color
- Security requirements:
- Ensure that normal industrial hygiene requirements are met.
- Empty the packaging completely and dispose of it according to applicable regulations.