Description
Wireless mini Wi-Fi router company Tenda N3 Technologies supports 802.11n-lite 2.4 GHz, which allows you to configure the single-antenna communication speeds up to 150 Mb / s. Tenda N3 betting on the new, cleverly designed Broadcom BCM5356 chipset, which was developed for the actual transmission speeds up to 80 Mb / s. And all this with a consumption of only 5 Watt! The new chipset brings the "Green Wi-Fi mode" that dynamically off-chip components, thereby reducing active power consumption.
The device uses the characteristics of the router, home Internet gateway, wireless access point and firewall in one. Tenda N3 is suitable for smaller firms and to households for sharing your Internet connection from your ISP. This mini router has only one LAN port and fits and especially in an environment where computers connect to the Internet wirelessly. Router has implemented WDS, which allows you to connect two or more AP and increase the wireless range. Tenda N3 by the motto "Easy to Use" and puts such emphasis on the easiest setting. The wizard in the Czech language, you install and configure your new Wi-Fi router takes only a few minutes. Tenda N3 strongest supports WPA2-PSK, the ability to disable broadcast the name of your wireless network (SSID), MAC address filtering, port forwarding, and other standard network functions. Content filtering provides control access to inappropriate websites. The device is equipped with non-removable omni-directional antenna with a gain of 5 dBi.
Features:
- Wi-Fi standards: 802.11b / g / n
- Frequency: 2.4 GHz
- Wireless Modes: AP, Router, WDS Repeater
- Bit rate: 150 Mb / s
- Modulation: DSSS, OFDM
- Channel width: 20 MHz, 40 MHz
- Output power: <20 dBm (EIRP)
- Sensitivity: -87 dBm @ 11 Mb / s, -72 dBm @ 54 Mb / s, -68 dBm @ 150 Mb / s
- Security: WPA-PSK, WPA2-PSK, MAC ACL, URL filtering
- Control method: HTTP
- Network Features: UPnP, SNTP, virtual server, DMZ host, DHCP server / client, WDS
- QoS: 802.11e WMM
- Interfaces: 1 x WAN, 1 x LAN, reset button
- Antenna: 1x 5dBi external, undismountable
- Chipset: Broadcom BCM5356
- Type: indoor, desktop
- Housing material: plastic
- Power supply: 9 V DC 600 mA
- Consumption: 5 W
- Cooling: passive
- Operating temperature: 0 ° to 40 ° C
- Dimensions (H x W x H): 25 x 95 x 112 mm
- Weight: 89 g
Package contents:
- 1x Tenda N3
- 1x Quick Installation Guide (CZ, SK, PL)
- 1x Power adapter (9 V DC 600 mA)
Nobody has entered comment on this product yet. Be first!