Description
Tenda i12 is a wireless Wi-Fi Access Point / WDS Repeater / Client + AP supports the 2.4 GHz 802.11b / g / n standard at up to 300 Mbps with MIMO 2x2 technology. Supports 4x SSID, VLAN, Active PoE, SMTP, and other technologies. 1x Gigabit LAN port. Tenda i12 is suitable for both small and medium-sized businesses and households. Tenda i12 includes "Quick Setup" for quick and easy setup in a few steps. Thanks to the manual in Czech, Slovak and Polish, the installation and configuration of your new Wi-Fi device takes just a few minutes. Thanks to the MIMO 2x2 technology, excellent coverage and high speeds of WiFi transfer are guaranteed. Tenda i12 supports many types of 64/128/152-bit WEP, WPA / WPA2-Enterprise, WPA-PSK, WPA2-PSK, SSID, MAC address filtering, SSL VLANs 4 different SSIDs with different security, SMTP v1 and v2c, output power settings, and other premium network features. The device is equipped with two integrated antennas, each with a gain of 3 dBi.
Tenda i12 provides three working modes
- Access point - In this mode, i12 is connected to the network using an Ethernet cable and sends your wireless network.
- WDS Repeater - In this mode you choose which WiFi network the i12 should connect to extend the signal where it is already weak or fluctuating. Primary devices must support WDS. The WiFi name remains the same, security and password as well, the range increases sharply. This allows you to connect two or more i12 to increase the range of wireless networks even in remote locations.
- Extension of WiFi signal - Client + AP - this mode is very similar to Universal Repeater mode, in this mode you choose to which WiFi network the i12 should connect to extend the signal where it is already weak or fluctuating. But in this mode, it is also possible to set up your own WiFi network, security, password, etc. Tenda i12 connects to the first WiFi network and creates a second WiFi network, both networks and devices communicate with each other directly in one LAN network.
Properties:
- WiFi 802 / 11b / g / n 300Mbps, 2.4 GHz, MIMO 2 × 2 technology
- Active 802.3at PoE power support
- Maximum power Tx 20 dBm, adjustable (step 1 dBm)
- Max. number of clients 40
- Limit associated clients: 100+
- Chip Broadcom 533 MHz
- 4 different SSID incl. different security for service departments
- SSID isolation, client isolation support
- SSID-To-VLAN Mapping / Tagging
- Activate / deactivate WiFi, hide SSID
- Security 64/128/152-bit WEP, WPA / WPA2-Enterprise, WPA-PSK, WPA2-PSK
- Placing both the ceiling and the wall
- SMTP v1 and v2c
- Ports: 1x 10/100/1000 Mb / s Gigabit LAN with PoE 802.3at support, Power Jack
- Centralized management with the Tenda M3 controller
- WiFi Multimedia (WMM) QoS 802.11e for high-quality VoIP transfer,
- APSD Capable, Wireless Multicast Forwarding, MAC address filtering
- Activating / deactivating SYS LEDs
- Supported OS: Windows 98SE, NT, 2000, XP, Vista, Windows 7/8/10, MAC OS, Linux
- 2x integrated antennas, each 3 dBi
- WiFi speeds 11n: up to 300Mbps (dynamically), 11g: up to 54Mbps (dynamically), 11b: up to 11Mbps (dynamically)
- Frequency: 2.4GHz-2.483GHz
- LAN setting: Static IP, Dynamic IP
- DHCP Server, Client List
- Management: Restart, Factory Reset, System Logs, Firmware Update, Time & Date Settings, Backup / Restore Configuration, User Management
- Temperature: Operating: -20 ℃ ~ 45 ℃, Storage: -30 ℃ ~ 70 ℃
- Humidity: Operating: 10% ~ 90% non-condensing, Storage: 5% ~ 90%
- Default IP Address: 192.168.0.254, Username: admin, Password: admin
- Certification: FCC / CE / Rohs / VoC
- Buttons: 1x Reset
- Dimensions: 144 x 144 x 40 mm
Package contents:
- 1x Tenda i12
- 1x Holder for ceiling and wall mounting
- 1x Quick Setup Guide (CZ, SK, PL)
- 1x Power Adapter (9V DC, 600 mA)
- 1x RJ45 Ethernet cable
- 4x Screws, 4x dowels
Categorized into following categories:
Routers
Nobody has entered comment on this product yet. Be first!