Tipa

Wireless Wi-Fi Extender / Access Point AP / Switch A302 company Tenda Technologies supports the 802.11n 2.4 GHz, which allows you to configure the two antennas communication speeds up to 300 Mb / s. Tenda A302 betting on new Broadcom chipset, which has a real transfer speed on WiFi to 95 Mb / s. And all this with a consumption of only 5 Watt! The new chipset brings the "Green Wi-Fi mode" that dynamically off-chip components, thereby reducing active power consumption. A302 is suitable for smaller and medium-sized firms and to households for extending existing wireless / wired network. Tenda A302 by the motto "Easy to Use" and puts such emphasis on the easiest setting. Thanks to the manual in the Czech language, install and configure your new Wi-Fi AP / Extender takes only a few minutes. Tenda A302 strongest supports WPA2-PSK, the ability to disable broadcast the name of your wireless network (SSID), MAC address filtering, port forwarding, and other standard network functions. Content filtering provides control access to inappropriate websites. The device is equipped with two non-removable omnidirectional antennas, each with a gain of 5 dBi.

Tenda A302 provides two operating modes - Access Point and extending the WiFi signal Universal Range Extender.

Access Point - Access Point:

- In this mode, the A302 is connected to the network via Ethernet cable and transmits the wireless network. Because it contains a total of 4 LAN ports, it works as a switch - Switch, and you can also connect other devices via Ethernet cable.

Extending WiFi signal - Universal Range Extender:

- In this mode you select, to which WiFi networks should connect A302 and extend your signal where it is already weak or fluctuates. WiFi name remains the same range will increase dramatically. Thus it allows you to interconnect two or more AP / Extender and increase the wireless range even in distant places.

Properties:

- Wi-Fi standards: 802.11b / g / n
- Frequency: 2.4 GHz
- Wireless Modes: AP, Repeater, Extender
- Bit rate: 300 Mb / s
- Modulation: DSSS, OFDM
- Channel width: 20 MHz, 40 MHz
- Output power: <20 dBm (EIRP)
- Output Power Control: no
- Sensitivity: -87 dBm @ 11 Mb / s, -72 dBm @ 54 Mb / s, -68 dBm @ 270 Mb / s
- Security: WPA-PSK, WPA2-PSK, MAC ACL, URL filtering
- Control method: HTTP
- Network features: DHCP client
- QoS: 802.11e WMM
- Centralized management: no
- PoE: no
- Interface: 4x LAN
- Antenna: 2x 5dBi external, undismountable
- Antenna connector: no
- Chipset: Broadcom
- Type: indoor, desktop
- Housing material: plastic
- Power supply: 9 V DC 600 mA
- Consumption: 5 W
- Cooling: passive
- Operating temperature: 0 ° to 40 ° C
- Dimensions (H x W x H): 220 x 280 x 70 mm
- Weight: 0.7 kg

Package contents:

- 1x Tenda A302
- 1x Quick Installation Guide (CZ, SK, PL)
- 1x Power Adapter (9V DC 600 mA)