Description
Repeater wifi 300M U25
Amplifier (repeater) of wifi signal emGo-U25 provides widening of covering and amplification of signal power and quality with an existing wireless net and minimizes the places not covered by wi-fi signal in your house or office. With pressing the only button WPS on the router you will be connected with the repeater emGo-U25 and with easy setting you will widen the range of your wireless net. No password is needed to remember for connecting new wifi devices! For connecting a new notebook or a tablet just press the button WPS and you will be automatically connected with an encrypted connection to your net.
The repeater is capable to work in mode REPEATER, REPEATER WISP, ACCESS POINT, ROUTER, CLIENT and CLIENT WISP. The repeater ensures full-valued NAT translation of IP addresses and works as a full-valued home gateway in the "Router"mode. The minimalistis dimensions and design setting for a direct connection to the 230 V socket provide the needed flexibility for frequent moving according to the requirements. You may set the repeater for connecting to the chosen wifi router only the first time and then you can switch it off and on or move it to another room, a terrace or in the garden according to your needs. The most suitable position for placing the repeater emGo-U25 will be found very easy with the indicator of signal intensity of wi-fi net.
A clear graphic indicator of signal power helps to choose the ideal place for placing the repeater. In addition, the repeater emGo-U25 is equipped with an Ethernet port for connecting of device via a cable. This equipment can be used for connecting of multimedia devices without wifi support, such as a TV or a satellite receiver. Blu-ray players, game consoles, DVD players or smart TVs with Ethernet support can be easy connected to the internet and your home network. The Ethernet port works in mode WAN, or LAN depending on currently chosen device mode.
- 300 Mbps WiFi repeater with integrated antennas
- supports all IEEE802.11b/g/n WiFi standards (2.4GHz networks)
- up to 300 Mbps data transfer rate via the wireless 802.11n protocol
- maximum WLAN security with WPA2, WPA and WEP(128/64)
- WPS button for easy WPS security setup
- can also be used as a normal wireless router
- in ’repeater’ mode the LAN port can be used as wired network connection
- practical signal strength indicator
Technical specifications:
- supported standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u
- supports 64/128bit WEP, complies with 128 bit WPA/WPA2
- supported modes: Router mode, repeater mode, AP client mode
- wireless transmission rate: max. 300 Mbps
- ports: 1 x 10/100M RJ45
- chipset: Realtek 8196E
- frequency band: 2.4~2.4835 GHz
- channels: 1-13 (Europe)
- power class: RF power 14 dBm (max. EIRP)
- internal antenna gain (typical): 3 dBi ±1 dBi
- receive sensitivity 11n : -70dBm@10% PER, 11g : -70dBm@10% PER, 11b: -85dBm@8% PER
- spread Spectrum: DSSS
- modulation: BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM)
- transmission distance: up to 100 m (indoor), 300 m (outdoor open air), depending on the environment
- power consumption: up to 3 W
- cascading: up to 5 levels (depending on usage environment)
- operating temperature: 0 ~ 40 °C
- storage temperature: -40 ~ 70 °C
- operating humidity: 10 ~ 90% non-condensing
- storage humidity: 5 ~ 95% non-condensing
- dimensions: 90 x 40 x 60 mm (W x D x H)
- net weight: 150 g
- packaging: 1 pc, paper box
Nobody has entered comment on this product yet. Be first!