Description
Turbo Speed COMBO fast drying PU adhesive is a one-component foam, specially developed for fast bonding with a set time of 60 seconds. It is ideal for a wide range of applications thanks to its high adhesion and bonding to various building substrates such as concrete, wood, stone or polystyrene. Once cured, it is volume stable and produces a high quality, uniform texture.
Characteristics
application by tube and gun
Fast curing, onset of setting after 60 seconds
Correction possible within 2 minutes
360° positionable application
high adhesion and bonding to various building substrates
volume stable after curing
high quality, uniform texture
Application
Concrete, masonry, stone, wood or polystyrene, etc.
Bonding of EPS and XPS boards
bonding plasterboard, wooden elements, OSB, decorative elements and interior partitions
Recommended application instructions
Moisten the substrate, apply the adhesive to the substrate, moisten again, wait 60 seconds and bond the elements together. However, no later than 2 minutes after application. The glued element can still be handled for 60 seconds.
When storing at low temperatures, we recommend tempering the container at room temperature for 1 hour before use. Screw on the application gun and shake the box thoroughly (at least 30 times). Adjust the desired dosage with the locking screw on the application gun.
Volume: 750ml
Packaging type: pistol jar
Colour: yellow
Hazard identification
H222/229 - Extremely flammable aerosol. Container is under pressure: may burst when heated.
H317 - May cause allergic skin reaction.
H319 - Causes severe eye irritation.
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H315 - Skin irritant.
H332 - Harmful by inhalation.
H335 - May cause respiratory irritation.
H351 - Suspected of causing cancer .
H362 - May cause harm to infants through breast milk.
H413 - May cause long-term harmful effects to aquatic organisms.
H373 - May cause organ damage by prolonged or repeated exposure.
EUH204 - Contains isocyanates. May cause allergic reaction.
P201 - Obtain special instructions before use.
P210 - Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P211 - Do not spray into open flames or other sources of ignition.
P251 - Do not pierce or burn even after use.
P261 - Avoid inhalation of dust/smoke/gas/mists/vapours/aerosols.
P263 - Avoid contact during pregnancy and breastfeeding.
P280 - Wear protective gloves/protective clothing/goggles/face shield/ear protectors/...
P304/340 - IF BREATHING: Move person to fresh air and keep in a position to facilitate breathing.
P501 - Remove contents/packaging ...
Ingredients:Chloralkanes, C14-17, Dimethyl ether, 2,2'-dimorpholinyldiethyl ether, Diphenylmethanediocyanate, isomers and homologues
Always follow the information on the product label.
Nobody has entered comment on this product yet. Be first!