Tipa

CCD color camera with washer intended for drilling preferably above the rear registration plate of the vehicle. At the same time, the camera displays auxiliary trajectories for parking, rotating the image.

Technical parameters:

- scanning angle: 120°
- PAL TV system
- min. lighting 0.1 LUX
- sensor chip 1/3 CCD
- resolution of 600 TV lines (976 x 592)
- displays auxiliary trajectories for reversing, after cutting the green loop the trajectories disappear
- mirror output image, directly after cutting the white loop
- output image normal, rotated by 180° after cutting the orange loop
- waterproof cover: IP 68
- power supply: 12 V / 60 mA
- working temperature from - 20 °C to + 80 °C
- cable length 5 m
- automatic white balance, AGC and BLC
- connection connectors: video output - CINCH female, power supply - loose wires. Disconnect connector on the camera
- dimensions: for embedding ø 20 mm, total height 30 mm, after embedding 13 mm + inlet for washer
- part of the package: ø 20 mm hole punch, 2 m silicone tube, tube junction