Tipa

The UPO2072E oscilloscope is a desktop digital two-channel oscilloscope with Ultra Phosphor technology from the UPO2000E series. The oscilloscope features 1 GS/s real-time sampling and waveform sampling rates up to 80000 wmfs/s. This is more than enough for the bandwidth which is 70 MHz (unlike the higher versions UPO2104E, UPO2102E which are up to 100 MHz). The oscilloscope enables continuous hardware recording of up to 65,000 waveforms with a maximum storage depth of 56Mpts per channel and automatic measurement of 34 signal parameters.
It is a multifunctional, high-performance oscilloscope that is easy to operate with very good technical specifications. It is equipped with a display of 800 x 480 pixels. It supports USB storage and communication with PC via USB plug and play function. Compared to the earlier version UPO2072CS, it differs by new software equipment (firmware).
The UPO2000E series is aimed at satisfying the most extensive markets using oscilloscopes, such as communications, semiconductors, computers, aerospace, instrumentation, industrial electronics, consumer electronics, automotive electronics, field equipment maintenance, research and development, education, etc.


Product parameters :

- bandwidth: 70MHz
- number of channels: 2
- real-time sampling: 1GS/s (one channel), 500MS/s (two channels)
- max. memory depth: up to 56Mpts (per channel)
- number of waveforms per second: up to 80,000 wfms/s
- time base range: 5ns/div-50s/div
- input coupling: (1MΩ±2%)//(21pF±3pF)
- vertical axis: 1mV/div - 20V/div (1MΩ)
- rising edge (typically): ≤5ns
- accuracy of DC gain: ±3%
- number of stored waveforms: 65000
- trigger: Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup/Hold, Pulse Width, Slope, Video, Pattern
- bus decoding: RS232/UART, I2C, SPI
- mathematical operations with waveforms: A+B, A-B, AxB, A/B, FFT, Logic operation, Editable Advanced, Filter
- automatic measurement: Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, +Width, -Width, +Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
- number of measurements: 5 simultaneous measurements
- statistics: average, Max, Min, standard deviation, number of measurements
- frequency counter: hardware 6 bits
- standard interface: USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail)


Technical parameters :

- recommended calibration interval: 1 x a year
- certification class: CAT I 300 Vrms, CATII 100 Vrms, transient overvoltage 1000 Vpk
- power supply: 100V-240V AC, 45 to 440Hz
- display: 8 inches, TFT LCD, 800x480 pixels
- weight: 3.5 kg
- dimensions (w x h x d): 336 x 164 x 108mm


Package contents :

- probe up to 100MHz (with switchable divider 1x, 10x): 2 pcs
- detachable three-wire power cable: 1 pc
- USB cable (UT-D06): 1 pc
- user manual: 1 pc


MANUFACTURER :

UNI-TREND
www.uni-t.cz


You can download the update software on the manufacturer's website:
https://instruments.uni-trend.com/digital-oscilloscopes/945.html