Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
Digital clamp meter UT208B is used for measuring AC and DC voltages up to 1000V, AC and DC currents up to 1000A and frequency at low voltage (LV) up to 1000V and current up to 1000A in the range of 40Hz to 400Hz and low voltage (mn) 10Hz to 1MHz. It has protection against voltages greater than 1000V and an audible and optical alarm on all ranges. Four-digit multi-segment display measuring 43 x 45 mm with backlight and fast refresh rate (3 times / s). The maximum displayable value is 6000. The display contains an analog 31-scale (bar graph). The opening of the jaws allows measurement on cables with a diameter of up to 42 mm. Non-contact electric field sensing (NCV) allows the detection of live conductors. Supplied probe - tip cover on test cables allows measurement on LV distribution in CAT III category without the risk of arcing. Without covers on the tips, test cables can only be measured on low-voltage CAT II distribution lines (eg 230V sockets). With the enclosed thermocouple type K (temperature sensor nickel-chromium - nickel-silicon) allows temperature measurement from -40 ° C to 1000 ° C. The sensor is a sensitive Hall probe. Option to purchase a flexible loop for measuring currents up to 3000A. Power battery 3pcs 1.5V R03. The power consumption of the meter is approx. 1.8 mA. The device has an automatic power saving function - after 15 minutes it goes into sleep mode, where it consumes only <50μA, which effectively extends battery life. The power save function can be turned off.
Product parameters:
- measurement of AC / DC voltage and current, resistance, diodes, continuity, capacitance - automatic polarity display - measurement of frequency of currents and low voltages (LV) up to 1000 V in the range of 40 to 400Hz - measurement of low voltage frequency (mn) in the range of 10Hz to 1MHz - measuring capacitance 60nF to 60mF - temperature measurement -40 to + 1000 ° C with enclosed thermocouple type K - ratio (relative) measurement of voltages and capacitances - Multi-segment display and audible / visual alarm - protection against voltages greater than 1000V across ranges - NCV function - contactless detection of live conductors - LoZ V function ~ measurement with low input impedance (approx. 2kΩ) of the device - INRUSH function - measurement of transients up to 100msec long - starting current when switching on the appliance up to 3000A with additional flexible loop - LPF ACV function - AC voltage measurement with nf filter (approx. 2.5 kHz) on inverters and with variable frequency - frequency / duty cycle measurement function - choice of automatic or manual range switching - built - in lamp - accuracy of current and voltage measurement is guaranteed when using the range in the range of 5% to 100% of the range, at hodnotě5% of the range it is necessary to change the range
Technical parameters:
1. AC current measurement (ranges / resolution / accuracy):
60,00A / 0,010A / 40Hz ~ 400Hz ±(2,0%+9) 600,0A / 0,100A / 40Hz ~ 400Hz ±(2,0%+5) 1000,0A/ 1A / 40Hz ~ 400Hz ±(2,0%+5) - frequency monitoring accuracy when measuring AC current in the range of 40 to 400Hz is ± (0.1% + 3) at 0.1Hz resolution - overload protection at 1000A
2. Measurement of AC inrush current (ranges / resolution / accuracy):
- if the measured resistance is less than 30Ω, the signal of the continuous circuit sounds a buzzer - with a measured resistance greater than 70Ω, the open circuit signal does not sound a buzzer - uncertainty between 31Ω and 69Ω - open circuit voltage about 1.0V - measurement in the range of 600Ω, with a resolution of 0.1Ω - overload protection at 1000 Vrms
10. Diode measurement:
- in the forward direction, the voltage drop of the semiconductor junction is less than or equal to 2V - for a silicon junction, a typical voltage drop is 0.5 to 0.8V - open circuit voltage about 3.0V - measurement in the range of 6,000V, with a resolution of 0.001V
- Note 2) Performance measurement (Duty Cycle) is only applicable for 10Hz to 10kHz square wave: 2Vpp ≤ input amplitude ≤ 20V p-p
- overload protection at 1000 Vrms
14. Non-contact electric field sensing (NCV):
- allows to detect live wires - as the intensity of the detected voltage increases, more segments of the bar graph will be displayed and with a higher value the buzzer will often sound and the LED will start flashing.
Other parameters:
- measurement of maximum and minimum values: yes - measurement in relative (ratio) mode for voltage and capacity measurement: yes - HOLD: yes - low battery indication: yes - automatic power off: yes - battery supply 1.5 V (R03): 2pcs - backlit display size: 43 x 45 mm - product dimensions: 272 x 81 x 43.5 mm - net weight of the product: 450g - product color: red and gray
Package contents:
- clamp multimeter UT208B: 1pc - test leads: 1 pair - thermocouple K up to 1000 ° C: 1pc - battery 1.5 V (R03): 3pcs - instructions for use: 1pc
Wholesale packaging:
- standard quantity per carton: 5pcs - standard carton dimensions: 355 mm x 330 mm x 165 mm - standard gross carton weight: 4.5 kg
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!