Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
UT171 Series Multimeters are hand-held multimeters with automatic and manual range switching and resolution 4 3/4 - 4 5/6 digit. The devices belong to the upper middle class, excel in quality design and reliability and are also suitable for industrial use. They can measure AC / DC voltages and currents, resistance, diode test, continuity test, capacitance, frequency, duty cycle, temperature, 4-20mA current loop, conductivity, VFC, NCV. The devices enable data storage and connection via USB with optical separation or via Bluetooth. The display is dark on a light background. The display range is ± 40000 for voltages, currents and frequencies and ± 4000 for capacitance measurements. Refresh rate 4 to 5 times per second. The fuses are protected by tube fuses (range 10A fuse FF 10A H / 1000V (10 x 38mm); range mA/µA fuse FF 800mA H / 600V (6 x 32mm)). The multimeter is powered by six AAA 1.5V alkaline batteries. The measuring range can be selected automatically or manually. Included are test lead cables and batteries.
Multimeter UNI-T UT171A
Product parameters :
- fully complies with IEC / EN61010-1, and have double insulation - categorized as CAT III 1000V - internal el. installation including three-phase distribution - categorized as CAT IV 600V - outdoor el. installation (belay elements, beginning of internal installation) - the maximum display is 40000, backlit LCD display type - display of frequency measurement display 40000 - display for capacity measurement 4000 - refresh rate for most measurements 4 to 5 times per second - setting ranges automatic or manual - AC voltage (AC) measuring ranges : 400 mV / 1000 V - AC measuring ranges of current : 400 μA / 10 A - DC voltage measuring ranges (DC) : 400 mV / 1000 V - measuring ranges of DC current (DC) : 400 μA / 10 A - resistance ranges : 400 Ω / 40 MΩ - capacitor capacity measuring ranges : 4.000 nF / 40.00 mF - measuring ranges from : 60 Hz to 10 MHz - high precision - analogue scale Bargraf, 21 divisions - TRMS, measurement of voltage rms voltage st. voltage and currents - during AC voltage measurement, the frequency display or the voltage duty cycle can be measured on the secondary display - on the secondary display it is also possible to measure the AC component mounted on DC voltage - datalogging 1000 values - relative measurement mode - measurement of MAX and MIN peaks with 1ms response - Indication of poor wiring - Low battery indication - automatic shutdown (sleep when idle) - Overload protection of voltage inputs - protection of surge inputs with fast fuses - input impedance 10MΩ - Non-contact voltage detection without test probes - test of diodes and semiconductor transitions with voltage 0 to 3V - power 6pcs 1.5V AAA batteries - supplied USB cable with converter including software on CD - it is possible to buy a Bluetooth adapter UT-D08 - measurement in electromagnetic field with intensity 1V / m is possible with additional error 5%
Technical parameters :
- DC voltage measurement (input impedance is 10MΩ) : ( range / resolution / accuracy ) 400.00 mV / 10µV / ± 0.025 % + 5 4.0000 V / 0.1 mV / ± 0.025 % + 5 40.000 V / 1mV / ± 0.025 % + 5 400.00 V / 10mV / ± 0.03 % + 5 1000.0 V / 100mV / ± 0.03% + 5
- AC voltage measurement (input impedance approx. 10MΩ, 45Hz to 1kHz) : ( range / resolution / accuracy ) 400.00 mV / 10µV / ± 0.4 % + 40 4.0000 V / 0.1 mV / ± 0.025 % + 5 40.000 V / 1mV / ± 0.025 % + 5 400.00 V / 10mV / ± 0.03 % + 5 1000.0 V / 100mV / ± 0.03% + 5 LoZ 100.0 V / 0.1 V / ± 2.0 % + 10 V.F.C. 600V/1000V / 0.01 V/0.1 V / ± 2.0 % + 10
- Measurement of frequency, duty cycle and period : ( range / resolution / accuracy ) 60.000 Hz až 10.000 MHz / 0.0001 Hz až 0.001 MHz / ± 0.01 % + 5 0.1 % až 99.9 % / 0.1 % / ± 3.0 % + 40 100.0ms až 0.100 µs / 0,1ms až 0,001µs / ± 0.1 % + 5
- Display type : backlit LCD TN - sampling frequency : 4 to 5 / sec - number of digit : 40000 - analog line : 21 segments - Power supply : 6 x AAA 1.5 V batteries - fuse protection 10A with fuse FF 10A H / 1000V (10 x 38mm) - fuse protection mA / µA fuse FF 800mA H / 1000V (6 x 32mm) - instrument dimensions : 206 x 95 x 53 mm - weight: approx. 500 g (including batteries) - working temperature : 0 ° C to 40 ° C - working relative humidity at 0 ° C to 30 ° C less than or equal to 75%, at 30 ° C to 40 ° C less than or equal to 50% - storage temperature : - 10 ° C to 50 ° C - The device meets the standards : cETLus, CAT III 1000V, CAT IV 600V, double insulation, overload protection greater than 1000V EN 61326-1: 2013; EN 61326-2-2: 2013 EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012 Conforms to UL STD .: 61010-1, 61010-2-030 Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
- Manufacturer : UNI-TREND - www.uni-t.cz
Package contents :
- UT171E multimeter with storage case - Battery 6 x AAA 1.5 V - Fuse F1: 6 x 32mm FF 800mA H 1000V (6 x 32mm) - in the device - Fuse F2: 6 x 25mm FF 10A H 1000V (10 x 38mm) - in the device - USB cable with opto-el. converter and CD with software - test leads with CAT III 1000V, CAT IV 600V tips - instructions for use in Czech, Slovak and English
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!