Tipa

Identify mold-threatened areas in your living rooms before fungal infestation is visible. The IR-SCAN-350RH can be used to measure dew points thanks to the connection of an IR thermometer with an integrated hygrometer. If it falls below this value, there is a risk of fungal infestation. The room temperature and humidity are measured when the device is switched on. The dew point detected in this way now serves as a reference for IR measurements at potentially mildew sites. The device will then show you where damp spots should be prevented due to insulation defects.

Product parameters:

Dew point measurement range: -30 to +100 ° C
Air humidity measuring range: 0 - 100% rel. humid
Recognizes thermal bridges
Non-contact mold warning
The colors in the form of traffic light warn of the danger of mold
Simple control
With dual aiming laser
Temperature, humidity and dew point display
Double laser
Temperature, humidity and dew point display
As you approach the dew point, you are alerted by traffic light colors
Switching between ° C / ° F
Backlit inverse display
Automatic shutdown


Technical parameters:

Emissivity: 0.95
Outer length: 168 mm
Calibrated by: No certificate
Min. emissivity value: 0.95
Outer width: 82 mm
Basic Accuracy: (±) 1.5%
Product Category: Infrared thermometer
Optics: 20: 1
Thermometer features: Pyrometer
Dew point scanner
Temperature resolution: 0.1 ° C
Weight: 163 g
External height: 58 mm
Temperature (max): +380 ° C
Temperature (min): -50 ° C
Basic measurement accuracy (+/-): 2 ° C
Max. emissivity value: 0.95
Energy management: 1x 9 V battery

Scope of supply: Battery 9 V, Carrying bag