Tipa

Hardened foam remover Premium Penosil is a special cleaning spray for dissolving hardened construction foam from tools and surfaces.

- Softens hardened foam so it can be removed mechanically.
- In addition to construction foam, the strong solvent also dissolves various surface treatments such as varnishes and paints.

Use
Removal of hardened construction foam from tools and damaged areas. Cleaning of window frames, window sills, doors, frames, etc. from hardened building foam during work.
Application temperature from +5 °C to +30 °C.
Before use, test the suitability of the solvent on the substrate, due to the risk of damage to the surfaces.

Method of use:
Shake and remove cap from valve before use.
Attach the included sprayer to the valve and spray onto the hardened foam you want to remove.
Try not to spray on adjacent surfaces, as the solvent dissolves various coatings (varnishes, paints).
Allow the solvent to act for 5-10 minutes, then mechanically remove the softened foam. Repeat the process if necessary.
Finally, clean the surface with a damp cloth or PENOSIL Premium Cleaning Wipes.
Handle with extra care as the can contains flammable gas.

Storage:
Guaranteed storage period of 12 months from the date of manufacture when stored in closed original packaging in a dry place between +5°C and +30°C. Protect from frost. Aerosol cans must not be stored or transported above +50 °C, near heat sources or direct
sunlight.

Security requirements:
The cleaner is flammable. Use only in well-ventilated areas, avoid smoking, heat, sparks from open flames and other sources of ignition. Do not spray near flames or heat sources when working. In case of fire, avoid inhaling toxic gases released during the fire. Keep out of reach of children. Avoid contact with skin and eyes. Detailed safety information is available in the safety data sheet.