Tipa

This butane hand torch TYPHOON 360 type KP19001 / PD210T (hereafter referred to as the torch) is intended for outdoor use, including for DIYers, small craftsmen, model makers or for use in gastronomy.
Burner for tanning coatings and paints, heating material for joining (e.g. copper pipes).
It can also be used for brazing, heat treatment, lighting grills, defrosting.
Flame regulation, piezo ignition by pressing a button, gas preheating - the advantage of preheating is the possibility of working in any position without so-called "flame whipping", max. flame temperature 1300°C.
New revised design of the burner body and the entire reservoir, version 2022 (completely new and much better design - new more stable reservoir, more durable control, new ergonomic handle, enlarged burner with preheating, more durable piezo ignition led outside the burner
gas preheating - ensures a more stable flame and partially also work in all 360° positions.
The torch can be used for small-scale crafts, such as tin soldering, various types of heating of materials, tanning of old coatings, performing small insulation work, etc.
With the burner, it is also possible to perform heat treatment of food such as flambéing, caramelizing, effective finishing of food preparation during presentation and serving, etc.
The burner can also be used to safely light grills, etc., wherever it is difficult to access with a match.
The burner can also be used for other activities where it is appropriate to use its functional properties.
You can also use it as a kahan with side exit.
The burner is equipped with a gas preheating function that increases efficiency when used at lower temperatures and/or at higher altitudes, preheating also partially eliminates flame whipping during movements and tilts of the burner.
This appliance is only used with a disposable piercing cartridge (type 200 bottle), filled with butane, with a content of 190 g, which complies with EN 417.
The cartridge is not included in the package.

Tip for use
During the preheating period or when moving the appliance, the gas may burn with a flickering flame. Preheating time is approx. 20 ÷ 30 seconds. At this time, do not tilt the torch from a horizontal position (cartridge from a vertical position) by more than 20°. After this time, when the burner has heated up sufficiently, it is possible to work with the burner and the cartridge at any angle/tilt (up to 360°). Premature tilting of the cartridge (when operating with an insufficiently heated burner) would result in the liquid content of the cartridge swelling into the burner and a significant whipping of the blazing flame. Should this phenomenon occur, immediately turn the burner to a horizontal position (cartridge to a vertical position).
During long-term use, we recommend working with the appliance under a maximum tilt of up to 60°, to avoid excessive heating of the appliance.

Technical parameters:

Power: 1.3 kW
Dimensions: 25 x 11 x 17 cm
Consumption: 100 g/hour
Nozzle diameter: 0.25 mm
Torch nozzle diameter: 20 mm
Gas preheating: yes (allows partial work in all positions)
Color: green
Piezo ignition: yes
Weight without cartridge: 0.580 kg
Recommended combustion air supply: min. 2.6 m2/h
Power regulation: yes