Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
Function / arbitrary waveform generator UTG2062B is a modern two-channel generator using direct digital synthesis technology to create accurate and stable output of arbitrary waveforms with a resolution of 1μHz, maximum output frequency 60 MHz, sampling 320 MS / s. Signal modulation is available with various modulations such as AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep, etc. from an internal or external source, by linear and logarithmic sweeping. The panel is ergonomically designed for easy operation. The use of the generator is envisaged in the design, development, testing, troubleshooting and repair of electronic and electroacoustic devices, such as testing circuits and devices in cellular and wireless systems, radio and television systems; testing of semiconductor components, etc. Thanks to DDS technology, it is able to generate accurate and clear signals with minimal distortion. A user-friendly panel with simple operation and a clear display allows you to work much more efficiently and quickly. It has a USB interface and powerful software for transferring data to a computer. More than 160 waveforms are stored in the internal energy-independent memory, eg mathematical, bioelectric, medical, trigonometric, antitrigonometric, transients in cars, etc. It has an excellent price / performance ratio and many functions. It can be used in laboratories of universities, research institutes, etc. This device meets the safety requirements for electronic measuring instruments GB4793 and safety standards IEC 61010-1/2, meets the safety standards for insulated voltage CAT II 300V.
Product parameters :
- two-channel generator - 2 equivalent, independent channels - possibility to connect both channels - digital synthesis of DDS signals - generation of sinusoidal signals with a frequency of 1μHz to 60MHz - generation of rectangular signals with a frequency of 1μHz to 60MHz - generation of various other waveforms (sine, rectangle, ramp, triangle, pulse, noise, DC, arbitrary) - modulation types AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep - use of modulation signal from internal and external source - possibility to enter the signal shape by a mathematical formula - possibility to enter the phase of the signal in degrees or radians - support for sweep and burst signal output - supports internal / external / manual trigger release - 6-bit high-precision frequency measurement of up to 200MHz external TTL compatible signals - signal output amplitude up to 10Vpp at 50Ω impedance or up to 20Vpp in high impedance mode - protection of terminals against overvoltage - sampling frequency 320MS/s and 16 bit vertical resolution - Possibility to store up to 16 groups of variable digital waves - USB interface on the front panel for entering waveforms - USB Host interface on the rear panel, powerful software for PC - LAN connector on the rear panel for firmware update - multifunction knob and numeric keypad for easy operation - system help - 4.3 "color TFT LCD display with high resolution
Technical parameters :
- output channels: 2 - sampling frequency: 1.28 GS/s (interpolation), 320 MS/s (DDS mode) - output frequency: up to 60MHz - frequency resolution: 1μHz - vertical resolution: 16 bits (including symbols, inscriptions) - wavelength of any shape: 8pts to 16Mpts - non-volatile memory: up to 160 groups of arbitrary curves can be stored - types and frequencies of generated signals: sine: from 1μHz to 60MHz rectangular: from 1μHz to 60MHz ramp (saw): from 1μHz to 3MHz pulse: from 1μHz to 20MHz any: from 1μHz to 15MHz Gaussian noise: up to 60MHz (-3dB) - DC signal offset (peak AC+DC): ± 5V (50 Ω), ± 10V (high resistance) - minimum rise/fall time of any signal: typically < 7ns - amplitude range: 1mVpp to 10Vpp (50Ω), 2mVpp to 20Vpp (High Z) - modulation types: AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep - operating modes: output on/off, continuous, modulation, sweeping, series - frequency measurement of TTL compatible signals: yes, in the range of 100mHz - 200MHz with an accuracy of ± 51 ppm - output impedance: adjustable from 1Ω up to 1kΩ, or High Z, factory setting 50Ω - output short circuit protection: yes - terminal overvoltage protection: at input voltage> ± 12.0V, frequency <10kHz, amplitude> 100mVpp - terminal overvoltage protection: at input voltage> ± 2.0V, frequency <10kHz, amplitude ≤100mVpp - total. harmon. distortion 20kHz, 1Vpp (typical value): <0.2% - accuracy: ± 0.5ppm 25℃ - aging rate in the first year: 1 ppm - temperature coefficient: ± 0,5 ppm /℃ - temperature coefficient: ＜ 2 ppm /℃ - display: TFT LCD 64K, with a diagonal of 4.3 ", WVGA (480 x 272 pixels) - USB Device interface: yes - power supply: AC from 100 V to 240 V, 45 Hz to 440 Hz, CAT II - power consumption: <50W - protection: fuse 250 V, T2 A - weight: 3.2kg - dimensions: 305 x 230 x 93mm - product color: white and gray
Contents of individual packaging:
- function generator UTG2062B: 1pc - power cable: 1pc - USB interface cable: 1pc - cable BNC-BNC (1m): 2pcs - manual: 1pc
Packaging for wholesale customers:
- standard quantity per carton: 2pcs - standard carton dimensions: 380 x 330 x 320 mm - gross weight of the carton: approx. 8.5 kg
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!