Tipa

PENOSIL Premium Gunfoam 65 is a professional gun foam with increased performance for demanding users.

- Performance is approx. 15% higher than that of ordinary foam.
- Uniform structure and low column expansion.
- Excellent adhesion.
- High quality foam structure.
- Application with a foam gun.

Use
It is used to install doors and windows, to insulate and fix pipes, to fill holes and gaps, and to provide sound and thermal insulation.

Application procedure
Air temperature during use +5 °C and +30 °C, best results at +20 °C.
Can temperature during application: +5°C to +25°C, best results at +20°C.
The surfaces must be cleaned of dust, loose particles and oil.

Method of use
Hold the can of foam in a vertical position and rotate the side of the gun by grasping the handle of the gun with one hand and rotating the can with the other hand. Make sure you are not aiming at other people when rotating the pistols. The can must not be screwed to the gun by turning the valve upside down or turning the gun on the can. After fixing the gun, shake the container well at least 20 times and turn it to the application position. Foam output can be adjusted using the gun trigger.

Cleaning
Uncured foam can be cleaned from tools and surfaces using PENOSIL Premium cleaner.
Once the hardened foam has softened, it can be removed mechanically using the PENOSIL Premium foam remover.
Hands, clothing and the foam gun can be cleaned of unhardened foam with moistened PENOSIL Premium cleaning wipes.

Technical parameters:

- Free time: 10-12 minutes
- Full curing (at 23°C): within 12 hours
- Full curing (at 5°C): up to 20 hours
- Density kg/m3: 25-30

Security requirements
The product is flammable. Protect from overheating and keep away from sources of ignition. Avoid direct sunlight and do not smoke while working. May cause sensitization by inhalation and skin contact. Ensure adequate ventilation during application. Use safety glasses and gloves. Keep out of reach of children.