Tipa

ELEGOO filament in blue is a good choice if you want a bright, clean shade that looks good on larger surfaces and in detail. The material has a uniform color and smooth structure, so prints look aesthetically pleasing and reproduce well. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.

Durability and precision
Thanks to increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, while still being just as easy to print from. The consistent 1.75 mm diameter and dimensional accuracy of ± 0.02 mm guarantee a smooth material feed and less risk of clogging. Thanks to the smooth surface and good heat conduction, even more complex models come out cleanly and without deformation.

Convenience and compatibility
The material is wound evenly and checked manually, which reduces the risk of tangling. The whole thing is vacuum-packed with a desiccant, so you can start printing right away after opening. The product is suitable for most FDM (Fused Deposition Modeling) printers that support 1.75mm filament.

Technical parameters:

Color: Blue
Weight: 1 kg
Recommended printing settings:
Pre-print drying settings: 55 ± 5°C
Ambient temperature and humidity: ≤ 50°C, ≤ 20% relative humidity (storage with desiccant)
Nozzle temperature: 200 - 230°C
Table temperature (depending on printer and surface): 35 - 65°C
Work surface type: Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates.
Print speed: Less than 280 mm/s
Physical properties:
Density: 1.30 g/cm³
Melting point: 161°C
Deflection point under load: 56°C
Softening point (Vicat test): 63°C
Mechanical properties:
Tensile strength (XY - measured in the horizontal plane of the print, where the material is strongest): 38 ± 2 MPa
Elongation at break (XY): 7.9% ± 1.6%
Flexural strength (XY): 74 ± 4 MPa
Flexural modulus (XY): 2979 ± 156 MPa
Impact strength (XY): 65.5 ± 3.6 kJ/m²