Tipa

Wireless magnetic sensor designed to detect the opening of iron doors, windows and gates, for the iGET SECURITY M5 alarm. He will warn you if you forget to close the window / door / gate when leaving. Tamper protection, maximum 256bit transmission security, very long battery life of 5 years, alarm constantly monitors the activity of this sensor, as well as the signal, battery percentage and more.

A sensor that mounts to the door frames of iron doors, windows and gates. The second part of the sensor is then directly on the doors / windows / gates. When these two parts are separated by 1 cm, detection occurs. The sensor also monitors the condition of the doors / windows, thus notifying which windows / doors / doors remain open when the alarm is activated. Processing in a modern design, low energy consumption. Easy pairing to the basic alarm set using a QR code. Location distance from the main unit up to 1 km.

- sensor, where it is necessary to guard by opening the magnetic contact, ie. reacts when doors, windows, gates, etc. are opened,
- detection based on the separation of two magnetically interconnected parts, one part is located on the door / window / gate frame and the other part on the door / window / gate, as soon as they are more than 1 cm apart, the contact opens and an alarm signal is sent,
- this sensor also knows what condition the window / door / gate is in - ie. whether they are open or closed right now. When the alarm is activated when leaving the building, the alarm notifies you via the application notification or via SMS which window / door / gate has remained open and it is possible to choose whether or not it should remain so.
- Example of notification of an application or SMS when a forgotten open door window: "The following sensors are still disconnected, really change the alarm status? Garage door."
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- contains a signaling LED diode - lights up when an opening is detected, stays on when the battery is low, also serves as a test button,
- the highest encryption of 256bit wireless transmission,
- battery life up to 5 years depending on the number of openings,
- distance of the sensor from the main unit up to 1 km,
- the iGET M5 alarm still checks if this sensor is available, also the signal strength and the% of the battery in the sensor,
- setting options: immediate alarm, delay, Home mode, Welcome Gong,
- thick double-sided tape included in the package for easy attachment,
- concealed mounting holes in the sensor and magnet for mounting with screws.

Properties:

- Transmission frequency: 868.35 MHz
- Cable length between transmitter and iron part: 290 mm
- Operating temperature: - 10 ° C ~ + 50 ° C
- Operating humidity: up to 90% (no condensation)
- Battery life: up to 5 years
- Power supply: 1x 3V battery, type CR123A
- Operating current: up to 100 mA
- Quiescent current: 0.015 mA
- Contact opening: at a distance of 1 cm or more
- Signal range to the central unit: up to 1 km in direct line of sight
- Sensor weight: 185g including battery
- Sensor dimensions (length x width x depth): 84 x 26 x 22.5 mm
- Dimensions of the iron part (length x width x depth): 105 x 37 x 9.5 mm
- Magnet dimensions (length x width x depth): 105 x 15 x 14.5 mm