Tipa

Shelly Wave Pro 3 is a 3-channel DIN rail relay that supports up to 48 amps and is designed for professional and commercial applications. Thanks to Z-Wave and Z-Wave Long Range technology, it offers a range of up to 1 km, which allows reliable operation even in large buildings. It supports the control of 3 independent circuits via potential-free contacts, making it compatible with a wide range of voltages and devices. It also allows scheduling, scenes and automation - all remotely via a compatible Z-Wave gateway. The device is energy-efficient and is great for residential, hotel, office and industrial installations.

Three independent channels
The Shelly Wave Pro 3 relay offers three relay outputs - each with a maximum load of 16 A. The device can therefore handle 48 A, which allows independent control of lighting, heating systems or other powerful devices within a single installation. This makes it easy to integrate different circuits in one place without the need for additional modules.

Range up to 1 km
The device works in both a standard Z-Wave mesh network and a Z-Wave Long Range network. In Long Range mode, the range can be up to 1,000 meters in a straight line, eliminating the need for repeaters in large buildings. In mesh mode, the device can also act as a repeater, extending the range of the Z-Wave network.

Remote control and automation
With support for schedules, smart scenes, and integration with other Z-Wave devices, you can customize the relay's operation according to your daily routine or outdoor conditions, such as sunrise and sunset. This way, you can reduce your electricity bills. In addition, the SmartStart function allows you to easily add devices to the network by scanning a QR code - no manual configuration is required.

Working with various types of loads
Thanks to the potential-free contacts, Shelly Wave Pro 3 can control both resistive loads (e.g. heaters), capacitive loads (e.g. electronic devices) and inductive loads (e.g. air conditioners, refrigerators), if equipped with an RC (snubber) circuit. This allows the device to be widely used in industrial, hotel or office installations.

Low power consumption and protection
The relay consumes less than 0.3 W, making it one of the most energy-efficient options available on the market. Overheating protection automatically switches off the device if the temperature exceeds 80 °C and sends a notification to the gateway, ensuring the safety of the installation.

DIN rail installation
The compact housing (96 × 53 × 59 mm) and the possibility of mounting on a standard DIN rail allow for easy integration into existing switchboards. The product complies with the worldwide DIN standardization, simplifying the design and installation process in a professional environment.

High compatibility and security
Shelly Wave Pro 3 works with all certified Z-Wave gateways and supports S2, S2 Authenticated and S0 security standards. It also offers OTA (Over-The-Air) updates, allowing for ongoing software maintenance without the need to disassemble the device.

Technical parameters:

Power supply: 110-240 V AC, 50/60 Hz
Power consumption: < 0.3 W
Power measurement: No
Maximum AC switching voltage: m240 V
Maximum AC switching current: M 16 A per channel, 48 A total
Maximum DC switching voltage: 30 V
Maximum DC switching current: 16 A per channel, 48 A total
Overheat protection: Yes
Range - long-range network: Up to 80 m indoors, up to 1000 m outdoors
Z-Wave repeater (long range): No
Z-Wave frequency (long range): 864.0 MHz
Range - Mesh network: Up to 40 m indoors
Z-Wave repeater (Mesh network): Yes
Z-Wave frequency (Mesh): 868.4 MHz
Processor: Z-Wave S800
RF transmitter power: < 25 mW
Dimensions: 96 × 53 × 59 ± 0.5 mm
Weight: 150 g
Mounting: DIN rail
Maximum terminal torque: 0.4 Nm
Wire cross-section: 0.5-2.5 mm² (20-14 AWG, green terminal)
Wire stripping length: 6-7 mm
Housing material: Plastic
Color: Black
Operating temperature: From -20 °C to 40 °C
Humidity: 30-70%