Tipa

Full HD iGET HOMEGUARD HGPLM828 with IP66 is an accessory for all CCTV camera recorders and iGET HOMEGUARD sets. It is designed for iGET HOMEGUARD HGDVK47xxx, HGDVK87xxx and also fully compatible with HGDVK46xxx, HGDVK86xxx. FullHD 1080p resolution (1920 x 1080) for high-quality video, day and night operation, 1 / 2.8 "CMOS sensor, IR illumination up to 30 m, 3.6 mm focal length, IP66 dust and dust. The iGET HOMEGUARD HGPLM828 color outdoor camera is designed to connect to the DVR recorder and monitor the indoor and outdoor areas in a very high resolution FullHD 1080p (2MP equivalent to 1200 TVL) and can be freely located anywhere on the house, in the garage, on the Cabin, warehouse, but also in the home, office, etc. It contains a massive fully adjustable holder for proper fastening wherever needed.

Properties:

- Very high resolution FullHD 1080p (1920x1080)
- Designed for iGET HOMEGUARD HGDVK47xxx, HGDVK87xxx and also fully compatible with HGDVK46xxx, HGDVK86xxx
- Dust and water resistance IP66
- Night vision up to 30 m (includes 36 illumination LEDs 5 mm in diameter)
- Angle of view: 90 °
- Sensor 1 / 2.8 "CMOS, 2.0MP (equivalent to 1200 TVL), f = 3.6mm
- PAL / NTSC resolution: PAL: 25fps 1080p, NTSC: 30fps 1080p
- Gamma correction: 0.45
- Switch day / night mode automatically
- Electronic shutter 1/50 - 1/100 000 NTSC / PAL
- Backlight compensation / Backlight compensation
- Wide Dynamic Range Support - WDR (Wide Dynamic Range)
- Signal-to-noise ratio: more than 50 dB
- Infrared LED life: 10,000 h
- Camera body material: cast iron
- Operating temperature -20 ° C to + 50 ° C
- Connectors: BNC video, power supply
- Cable length from camera to connector: 50 cm
- Connectivity via the supplied 18.3 m power / video cable (includes video and power in one cable)
- Camera power: with a 12 V DC power adapter included; 0.5 A or from the DVR power supply to the recorder
- Dimensions and weight: 188 x 67 x 75 mm, 340 g

Package contents:

- iGET HOMEGUARD HGPLM828 camera
- Quick user manual EN, CZ, SK, PL, HU
- 18.3 m power / video cable
- 12 V DC power adapter; 0.5 A
- Holder for mounting the camera on the wall / ceiling
- Mounting plugs and screws