Description
Brushcutter RQ580T DEMON
New from the brand DEMON, now in the TURBO version
The brushcutter is intended for mowing grass, bushes or thickets, i.e. for mowing grass with a nylon string or a grass disc, for finishing work in hard-to-reach places with a lawnmower. The patented design of the new generation 62 cc engine ensures higher work efficiency thanks to reduced internal resistance. Triple air filtration system. The new DEMON technology allows the engine to develop up to 30% more power. High reliability and exemplary comfort of operation and work enable efficient use. The specialized DEMON® transmission enables the control of the head without the use of tools thanks to the built-in lock. Thanks to hardened gears and bearings, the gear can withstand higher loads.
Specifications:
The new model of the best-selling brushcutter in the Turbo version
Universal adjustable handle allows easy and precise control
The front handle is a specially bent aluminum tube, smoothly adjustable, which will simplify your work in difficult terrain
Continuous gas regulation
Solid steel shaft
A special pen that allows lubrication of the bevel gear
Comfortable profiled handles that reduce vibrations
Rigidly designed drive gearbox
The EASY LOAD system enables faster insertion of the string into the head without disassembly
Perfect balance reduces vibrations for more comfortable work
For work even in uneven terrain
Large solid cover with knife
Starter with Easy Start system (soft start)
Strong and comfortable two-shoulder belt with stabilization around the abdomen and chest area.
The belt significantly improves comfort even during long mowing, ensures full freedom of movement and reduces back fatigue.
Parameters:
Engine: 2-stroke air-cooled
Power: 2.2 kW / 7,500 rpm
Maximum speed: 10,700 rpm.
Idle speed: 3,000 rpm
Volume: 62 cc
Dry centrifugal clutch
Shaft diameter: 28 mm
Shaft length: 150 cm
Coverage width: 42 cm
Fuel mixture: 25:1 (fuel:oil)
Fuel tank: 1.1 l
Weight: approx. 8 kg
Package contents:
1 x DEMON RQ 580 TURBO - brushcutter
1 x Easy Load Head - string head
1 x DEMON® hardened hard blade - three-tooth disc
1 x Double shoulder strap
1 x Cover
1 x Cover extension
1 x String Knife
1 x Mixing container
A set of mounting material and accessories
Engine break-in:
Fill the first fuel tank with a 1:25 mixture
Then start the engine and let it idle for 15 minutes
We start working, but at 3/4 throttle - without using the maximum engine power. Allow the engine to rest (cool down) from time to time.
In this way, we will use up the first fuel tank to the end.
From the second tank, normal work can be done, but without haste. Remember to stop work from time to time and let the engine cool down.
From the third tank, you can already work in the full range of revolutions and dosing in accordance with the manufacturer's recommendation
Using a semi-automatic string head with the TAP'N Go system
While working at maximum engine speed, lightly tap the string head on the ground. There will be a brief release of the string and thus the necessary pulling. You can repeat the tap until the string is pulled to the desired length.
In the event of a longer extension, the string will be automatically cut. The motor scythe must be equipped with a protective cover for the string with a metal blade.
Description of the use of attachments:
String head: it is suitable for cutting low grass in an open area without obstacles.
Do not use for mowing around fixed objects (fences, trees, stones...). Damage to the string head may occur.
Metal string head: it is suitable for mowing low grass, thanks to its solid construction it can be used for mowing around solid objects (fences, trees, stones...).
Three-toothed, four-toothed blade: it is suitable for cutting tall grass and unyielding grass.
Do not use on reeds, rushes, bushes or trees, for mowing around solid objects (fences, trees, stones...). The motor scythe may be damaged.
Eight-tooth blade: for mowing old dry grass and reeds.
Multi-tooth blades (22-80 teeth): for mowing overgrowth, bushes or weaker trees up to a trunk diameter of 60 mm.
The greater the number of teeth, the better the motor scythe can handle even stronger blows or even weaker trees.
Nobody has entered comment on this product yet. Be first!