Tipa

Unrivaled efficiency and low power consumption charger with built-in Bluetooth technology. Sophisticated microprocessor-controlled battery charger. Single output, active cooling.

Integrated Bluetooth
Set up, view and configure the Blue Smart IP22 charger via your smartphone. You can view the status of the charger and battery. Even control the charger functions using the VictronConnect app. The default voltage and current are displayed on the screen. You can download the app for iOS and Android here. You can also download the VictronConnect app for free on Google Play or the App Store.

High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. And once the battery is fully charged, power consumption drops to 0.5W, about five to ten times less than the industry standard.

Adaptive 6-stage charging algorithm: test - bulk - absorption - reconditioning - float - storage
The charger is equipped with a microprocessor controlled "adaptive" Battery Management. The adaptive function automatically optimizes the charging process

Storage mode: less maintenance and aging when the battery is not in use
Storage mode - if the battery has not been discharged for 24 hours. In storage mode, the voltage is reduced to 2.2 V / cell (13.2 V for 12 V batteries) to minimize gassing and corrosion of the positive plate. Once a week, the voltage is increased to the absorption level to "equalize" the battery. This function prevents electrolyte stratification and sulfation.

Also charging Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged in the bulk - absorption - float algorithm.

NIGHT and LOW settings
When night or LOW mode is set, the output current is reduced to max. 25% of the rated power and the charger will be completely silent. NIGHT mode will end automatically after 8 hours. LOW mode can be ended manually.

Overheating protection
The output current will be reduced if the temperature rises above 50 ° C, but the charger will not be damaged.

View the detailed online manual with a description of all Smart functions here.

Technical parameters:

Input voltage: 180 – 265 V alternating voltage (AC)
Frequency: 45 – 65 Hz
Charging current: 20 A
Charging current in night and LOW mode: 7.5 A
Power consumption without load: 0.5 W
Number of outputs (charged batteries): 1
Charging nature: adaptive four-stage
Absorption charging voltage: 14.4 V
Treatment charging voltage: 13.8 V
Storage mode voltage: 13.2 V
Protections: output polarity reversal, output short circuit, overheating
Operating temperature range: from – 20 to + 50 °C
Humidity: maximum 98%
Cover material: aluminum
Color: blue (RAL 5012)
Battery output: terminal block without cables
230 V AC input to charger: 1.5 m cable with classic plug
Protection level: IP 22
Plug type: CEE7/7 (Schuko)
Weight: 1.3 kg
Dimensions (height x width x length): 65 x 108 x 235 mm