Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
The compact recuperator HRV100 is intended for decentralized ventilation with heat recovery for use in one room in apartment buildings.
The product is intended for continuous operation. It is equipped with a storage exchanger whose task is to collect and return (recuperative) thermal energy in the process of extracting and supplying air from the room in which it is installed. The system works in two modes: exhaust and intake. Each of the modes can work at two speeds:
1 - slow exhaust - slow intake 2 - fast exhaust - fast intake The duration of each mode is 60 seconds. Gear shifting is done with a two-position switch. Changing the position of the switch (fan speed) of the recuperator is done by switching using the remote control.
Characteristic:
Power supply 230V 50Hz
1st gear
Volume 32db Capacity 35 m3 / h 1.5 watts
2nd gear
Volume 36db Capacity 50 m3 / h Watts 2
Use: Heat recovery makes it possible to limit heat losses caused by room ventilation. The recuperator's task is therefore to recover heat from the waste air from the room in which it is installed. The HRV series unit is equipped with a storage heat exchanger that captures and stores thermal energy to transfer it to the outside air. Thanks to this solution, it is possible to exchange fresh air with a temperature close to the temperature prevailing in the room.
Air extraction mode: The HRV recuperator is always switched on in suction mode. The air removed from the room after it is switched on transfers thermal energy to the aluminum exchanger. After sixty seconds, the fan will automatically switch to power mode.
Supply mode: The air supplied from the outside is heated by the accumulated heat of the exchanger before entering the room. Thanks to such action, heat loss is imperceptible.
Control: The fan is switched on and off using a switch that is part of the building's electrical installation. HRV series devices have the ability to switch between two operating speeds. In the case of recuperation units HRV100P, HRV125P, the speed is changed using a remote control. Thanks to the remote control, the device can be turned on and off to change the speed of operation. After turning it off and on again, the device will run on the last set gear.
caption to Figure 3. 1 - supply-exhaust fan 2 - fan cover 3 - screw securing the power compartment cover 4 - power supply compartment cover 5 - plugs masking the fan fixing screws 6 - pull chain used to switch between I-speed and II-speed fan operation (touch hrv100 without remote control) 7 - telescopic ventilation pipe for easy adaptation to the wall thickness of the room 8 - aluminum storage exchanger 9 - air filter 10 - the outer end of the ventilation pipe 11 - plugs masking screws
The connecting tube works on the principle of a telescope, it can be folded up to 26 cm and unfolded up to 40.5 cm, which gives us a better adaptation to the thickness of the walls.
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!