Tipa

Stay calm, wherever you are, with the intelligent iGET Security M4 security system. It is wireless, it communicates with your phone via Wifi and is able to send an alarm SMS via GSM. And because it understands both Android and iOS, you can watch indoor and outdoor IP cameras, drive 230V sockets, and more than 20 accessories. It has lots of logical and special features and can adjust its settings while sunbathing is needed on the beach. It is ideal for securing all buildings - houses, flats, chalets, offices, but also garages, shops, warehouses, offices, etc. It is a wireless alarm with simple installation and control that not only secures your house but can remotely or by timer to run electrical appliances using controlled sockets, and whenever it is possible to monitor the effects of IP cameras. In the event of an alarm, the alarm will start recording on this camera and immediately share the video with the application on your mobile phone. All detectors are wireless, most battery-powered, the main unit is powered by a 230V mains, but it also has its own backup battery lasting up to 8 hours. This ensures the subject is constantly guarded even in the event of a power failure.

The application is freely available for use on the Google Play and iOS markets. With this application, it is possible to make a complete set-up, adding detectors, control IP cameras, controlled sockets, etc. The application is in Czech, Slovak, English, Polish, Hungarian and many others. One application combines the setting and control of the alarm, IP cameras and controlled sockets, all-in-one. No wire pulling or complicated adjustment is required to connect the detectors to the central unit. The detectors are wireless and most are powered by batteries. Adding additional detectors is a matter of a few minutes. The central unit contains a SIM card slot that can send an alarm message. Wireless detectors have a range of up to 80 m, some 200 m. Just insert the batteries / plug and place the detector in space. Activating and deactivating the alarm is also easy and fast, either using a wireless keychain, wireless keypad, RFID chip or mobile application. Durable key rings serve as alarm remote controls. It is possible to activate / deactivate the alarm, turn on the alarm, and turn on the special Domestic mode only in some zones.

The iGET SECURITY M4 alarm is connected to the Internet. It automatically communicates with the server. An M4 connection to the Internet is required and can be done using a WiFi connection (an 802.11 b / g / n 150 Mbps) or an Ethernet cable with an RJ45 connector (10/100 Mbps). The user's mobile phone must be connected to the Internet anywhere in the world using a data connection or WiFi. The alarm thus communicates with the mobile phone. The alarm can not be connected to the Internet via data transfer via the SIM card. GSM connection with the SIM card is here as an additional / backup option as the user can contact the alarm by sending an SMS about the alarm. Wireless IP cameras are directly connected to your home WiFi Internet connection as well as an M4 alarm. The iGET SECURITY M4 alarm includes 3 user account levels. The highest is the "Administrator", who performs all the settings and controls. Next is the "User" - it can control the alarm but does not perform the settings (activate / deactivate / home / SOS mode, view camera video online, control sockets, etc.). The last level is Host, which can only control these modes: activate / deactivate / home / SOS mode. If an administrator wants to add additional users, it's very easy. Just install "iGET M4" on another mobile phone. Then, on the first phone, you can see the QR code for sharing and scan the other phone in the app. Pairing is completed.

No wire pulling or complicated adjustment is required to connect the detectors to the central unit. The detectors are wireless and most are powered by batteries. Adding additional detectors is a matter of a few minutes. Wireless detectors have a range of up to 80 m, even 200 m high. Simply insert the batteries / plug and place the detector in space. All accessories that are compatible with the iGET SECURITY M4 alarm have the iGET SECURITY M3Px (where "x" is the accessory number 1 to 99). Part of the iGET SECURITY M4 alarm is not only security but also smart home management. The remote control sockets for controlling one 230 V appliance can control lighting, heating, air conditioning, etc. The socket is connected to the mains socket and the appliance. You can turn it on / off remotely, set a timer, or set up a function. For the iGET SECURITY M4 alarm, it is also possible to add wireless Full HD IP cameras iGET SECURITY M3P15v2 (internal rotary) and M3P18v2 (outdoor fixed), and HD M3P20v2 (internal fixed). It is always possible to connect to this camera using online data transmission. Cameras are connected via WiFi to a wireless network. iGET SECURITY M4 offers full name zones / detectors and all accessories. It is possible to enter up to 160 characters. This is more convenient and clear than just selecting from a preset menu of room names. As soon as the alarm follows a signal that attempts to secure the band on which the wireless detectors communicate, it immediately causes an alarm. When disconnecting or connecting the main power supply, the 230 V alarm immediately informs the user using the application. The backup battery in the alarm lasts up to 8 hours. If the detector has a low battery, the yellow / red LED will light up on the detector. However, the iGET SECURITY M4 alarm user does not need to be controlled. For information on the low battery, the detector sends the iGET SECURITY M4 alarm, which informs the user about the application.

Properties:

- Intelligent wireless security system with Internet connection via WiFi and Ethernet connector
- In addition, when sending an alarm, it sends an SMS via a mobile GSM network. Caution: it does not have a data connection using the SIM card
- Controls indoor and outdoor IP cameras, switches controlled 230V sockets, and communicates with more than 20 types of wireless accessories, labeled as M3Px
- Supports up to 300 wireless accessories
- The overall system management and setup application is available for both Android and iOS markets, and is available in Czech, Slovak, English, Polish, Hungarian and other languages
- The M4 alarm also automatically downloads and installs the latest software / firmware updates from the server to keep up-to-date
- Anti-sabotage protection - As soon as the alarm follows a signal that attempts to block the band on which the wireless detectors communicate, it immediately triggers an alarm
- Informs about the status / alarm with the application, in addition, it also sends an SMS when alarming
- Activating and deactivating the alarm is done using the keys / keypad / RFID keys / applications on the mobile phone
- Contains an integrated 100 dB internal siren
- Contains a backup battery, so the alarm is still fully active even when main power is disconnected (up to 8 hours), this main power outage informs the user with the application
- Many alarm zone setting options, each detector / accessory can be named with its own name
- Includes a shock detector to detect M4 alarm damage
- Informs the user through an application in which the battery accessory is running. This battery pack has a high battery life of up to 2 years
- Secret alarms: The user enters an alarm code, but this unique code is different from the classic and activates the silent alarm in the alarm and informs about that other user
- Range of wireless detectors up to 80 m, selected up to 200 m. The detectors are easy to mount to the desired location
- With purchased IP cameras, you can freely watch home events and your phone instantly updates the current video

Optional accessories:

- iGET SECURITY M3P1 - Wireless motion detector PIR
- iGET SECURITY M3P4 - Wireless Door / Window Detector
- iGET SECURITY M3P5 - Remote control (key ring)
- iGET SECURITY M3P6 - Wireless Gas Detector
- iGET SECURITY M3P7 - Wireless SOS Button
- iGET SECURITY M3P9 - Wireless Water Detector
- iGET SECURITY M3P10 - Wireless Vibration Detector
- iGET SECURITY M3P11 - Outdoor siren
- iGET SECURITY M3P13v2 - External wireless keyboard with RFID reader
- iGET SECURITY M3P14 - Wireless smoke detector
- iGET SECURITY M3P15 - Wireless rotating IP HD camera
- iGET SECURITY M3P15v2 - Wireless rotating IP HD camera
- iGET SECURITY M3P16 - Wireless controlled socket 230V
- iGET SECURITY M3P17 - Wireless motion detector PIR without animal detection
- iGET SECURITY M3P18 - Wireless outdoor IP HD camera
- iGET SECURITY M3P18v2 - Wireless outdoor IP HD camera
- iGET SECURITY M3P19 - Wireless detector CO (carbon monoxide)
- iGET SECURITY M3P20 - Wireless internal IP HD camera
- iGET SECURITY M3P20v2 - Wireless internal IP HD camera
- iGET SECURITY M3P21 - Wireless magnetic door / iron door detector
- iGET SECURITY M3P22 - RFID key

Package contents:

- 1x M4 - central security unit, provides control of all wireless detectors and complete system inspection
- 1x M3P13v2 - Wireless touch keyboard with RFID reader. Battery life up to 6 months, adapter included
- 1x M3P1 - Wireless Motion PIR detector for room security, high battery life up to 2 years
- 1x M3P4 - wireless magnetic door / window locking sensor, high battery life up to 2 years
- 1x M3P5 - remote control (key ring), for quick activation and deactivation of the alarm
- 2x M3P22 - RFID key for the M3P13v2 wireless keypad, for quick activation and deactivation of the alarm
- 2x M4 Power Supply Adapter and M3P13v2 Keypad
- 1x Detailed User Manual in Czech, Slovak, English, Polish and Hungarian