Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
PENOSIL Standard Acrylic Sealant is a recoatable acrylic sealant for filling gaps and cracks before painting.
- Convenient to use - Low odor level - Forms a plastic joint - It doesn't fail, it doesn't spread - Recoatable - Adheres well to most building materials - UV resistant
USE It is mainly used for sealing cracks and joints in sanitary and other interiors. Sealing of windows and door frames, repair of minor surface defects before painting. For thickening porous surfaces. Filling cracks in concrete, bricks, plaster, other materials and screw holes. Not recommended for applications in constant contact with water.
APPLICATION PROCEDURE Application temperature between +5 ° C and +40 ° C. Surfaces must be free of dust, loose particles and oil. Not suitable for joints with high mobility (more than 8% of the joint width). Not suitable for joints of bituminous surfaces. Poor adhesion to glass and some plastics. May cause corrosion on exposed metal surfaces. Hardened sealant cannot be sanded as a sealant.
Method of use Cut off the threaded end of the cartridge and screw on the acrylic directional application nozzle. Cut the threaded end to make a suitable hole for the application. Insert the cartridge with the applicator into the gun and press the trigger of the gun repeatedly to fill the installation nozzle with acrylic. Apply acrylate to the joint by repeatedly and evenly pressing the gun trigger and pulling the nozzle continuously along the joint. After applying the acrylic, smooth it with a rubber scraper. Remove excess acrylic.
Cleaning: Uncured acrylate can be removed from hands and tools with water. The cured acrylate must first be removed mechanically and then with a damp cloth.
Technical parameters:
- Structure formation time: 4-5 min. - Curing time mm / 24 h: 2.5-3 - Density (DIN 53 479-B) g / cm3 1.71 - Heat resistance: -20 to + 70 ° C - Volume: 310ml
Security requirements: Ensure adequate ventilation during application. Keep out of reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. The cabin of the hardened sealant can be handled without endangering health. Detailed safety information is available in the safety data sheet.
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!